Washing machines are an important household appliance. These machines are designed to wash and dry multiple clothing items daily without any interruptions. This is a great convenience since you do not have to put in any manual effort or time. But washing machines tend to run into problems too. One common problem is washing machines stopping mid-cycle. While there could be several reasons for this and you can call in appliance repair services for troubleshooting, but you should be aware of how to tackle the issue yourself. So, let’s take a look at the potential reasons along with what you can do to prevent such situations from taking place in the future.

Check The Power Supply

The first thing you are going to do if your washing machine stops mid-cycle is check the power supply. Although, the power supply is basically an electric cord that can withstand wear and tear but will crack and become damaged due to a variety of reasons as well.

If there are other wires or cords jingled up with the power supply, it will lead to much quicker wear and tear. So, if you observe your washing machine suddenly stopping in the middle of the cycle, you should turn it off and check the supply for any issues.

You can also try plugging in the washing machine in another power socket. If the washing machine runs without any issues, it means the power socket is the problem. But, if not, you will need to check the circuit breaker. Circuit breakers tend to contain fuses that act as safety devices in case there is voltage fluctuation.

As the power fluctuates, the fuses blow to shut down the power supply to the unit. This protects the unit from expensive repairs and replacement. That said, you will need to check the circuit breaker as well. Make sure it is in the ‘ON’ position and check the fuses as well. If a fuse is blown, have it replaced.

A Hose Blockage

Another possible reason your washing machine might be stopping mid-cycle is due to hose blockage. You need to keep in mind that laundry detergent leaves residue during the washing cycle. This residue accumulates over time in the exit hose through which the dirty water exits.

If the hose is not cleaned thoroughly, it can lead to further accumulation of residue, which can clog the hose. As the water backs up, the pressure switch gets affected. If the issue is ignored, the pressure switch might become damaged as well.

If hose blockage is the issue, you can clean it yourself by using a cleaning agent. But, if there is any other reason causing the backing up of water, you will need to consult an expert to look into the matter. In most cases, you only have to clean the drain hose and don’t need to do any repair or replacement.

You should also inspect the connection of your washing machine. If it is connected to the sink or any other pipe, it may be backing up and causing the machine to malfunction.

Pump Failure

Pump failure can also be the reason behind your washing machine stopping mid-cycle. If there is a problem with the pump, it can stop the washer from draining. Modern washing machines come with pumps installed inside that are more vulnerable to breaking or being burnt out due to stuck debris.

In most cases, washing machines tend to make strange noises. If your washing machine is doing the same, you will need to check the pump. The drain pump might be malfunctioning due to debris. If you are lazy or ignore the noise, the pump will eventually need replacement. And since it can be a bit tricky to diagnose and repair, you will need to consult a household appliances expert.

Unbalanced Load

Not many people are aware of the fact that an unbalanced load can also cause issues. The reason is that back in the day washing machines did not come with any safety features. Modern washing machines do come with some that shut down the machine if there is anything unusual.

At the same time, people hardly read the user manual before operating the machine. Although washing machines are able to wash any type of clothing item, but that does not mean you overfill it. If you put in some clothes with quilts or other heavy items, the machine will struggle to rotate the load.

If it has to work harder than usual, the machine will use more power, which will raise the temperature and eventually shut down to protect itself. This is why you need to distribute the washable items in batches and wash them accordingly. Mixing up all types of clothing, beds or other items will only cause trouble.

Overloading or improper loading is a common cause of problems in refrigerators as well. So, before considering refrigerator repair Springfield, try easing it up by removing a few items from the fridge.

Faulty Door Latch

As mentioned earlier, modern washing machines are loaded with safety features. One of them happens to be the door latch as well. If the door latch is malfunctioning, the door will not lock in properly causing the machine to stop mid-cycle. This is a part of a safety feature.

Fortunately, fixing the door latch is easy as it is affordable and can be done yourself. All you need to do is follow the instruction manual and use the right tools to replace the door latch. But, if your washing machine is under warranty, you can claim the warranty.

Damaged Drive Belt

The drive belt is an important part of your washer because it makes the tub rotate. As it keeps working, it can wear or get damaged. In that case, it will no longer be able to move the tub and the machine may stop mid-cycle or won’t work.

To check the drive belt, turn off the washing machine and try to rotate the tub with your hand. If the tub moves without resistance, the drive belt is damaged.

Lack Of Maintenance

Lack of maintenance is an issue that affects the lifespan of the machine. Sometimes, minor inspections and maintenance can play a huge role in ensuring the machine functions without any problems. If you are willing to spend some time and effort into cleaning and ensuring the machine does not make any unusual sounds, you will be able to prevent any complications in the future.

Moreover, you should also invest in professional maintenance as well. It goes deep inside the machine to identify problems that could easily turn worse. A professional by performing a thorough inspection will fix the issues on the spot.

Unfortunately, many people believe it is just an expense. You should consider it an investment as you are paying to prevent future problems from taking place.

Conclusion

A washing machine stopping mid-cycle can be tricky or easy to solve. But with the information mentioned above, you will at least be able to get right down to the problem instead of wasting your time and effort looking into the wrong places. If you need help in fixing this problem, you can get in touch with a washer repair Fairfax expert. Plus, maintenance is key to the smooth functioning of the washer.

Next PagePrevious Page